TECHNICAL SPECIFICATIONS
Roof type exhaust fans could be mounted according to individual needs with its compact & esthetic
construction. Fan inlet port is fabricated to utilize minimum pressure loss during the suction of
the exhaust air.
They can be manufactured in various capacity and sizes with a performance of having a flow rate
of 2.000 – 15.000 m3/h and a pressure of 0-50 mmWG.
BODY
It is made from galvanized sheet with an appropriate thickness so as not affected from the
ambient conditions it is subjected to. A specially formed aluminum enclosure ensures outdoor
protection. Roof type exhaust fans are protected from exterior conditions by applying primer
over the body first and then two finish coats on.
MOTOR AND FAN
Fan is equipped with Standard type, 380 V, 50 Hz. 900 – 1400 rpm, three phase electric motor,
and rotor is applied static and dynamic balance so as to furnish the required air flow. Electric
motor is direct coupled utilizing a quiet operation.
Roof type exhaust fans have either the direct suction feature or could be hooked up to the duct.
|
